| Countersunk Head lnsert Nuts |
 |
|
|
| TYPE : |
Reduced head, Countersunk head |
|
Open end, Closed end |
|
Knurling/No Knurling body |
| Size: M3~M12 or #6-32UNC~1/2”-13UNC |
Material : Steel, Stainless Steel, Aluminum.
|
Finish : Yellow Zinc, Zinc, Zinc with Chrome three (Cr6+ free)
|
Special finish or material available upon request. |
| The threaded insert or nutsert is a fastener that allows to thread on details with reduced thicknesses or located uncomfortable |
| places where it would not be economical and/or possible to make a thread by tool. |
| Besides their simple and fast application the threaded inserts offer high resistance features eight in steel or aluminium . |
|
COUNTERSUNK
HEAD RIVET NUT FASTENER
| ECSERIES |
M
THREAD
SIZE |
D (mm)
+0
-0.1 |
HD(mm)
±0.2 |
HT (mm)
±0.2 |
L (mm) |
FOR
USING IN
MATERIAL
THICKNESS (mm) |
|
M3P0.5 |
5.0 |
5.7 |
0.4 |
9.0 |
0.5~2.0 |
M4P0.7 |
6.0 |
7.0 |
0.5 |
10.0 |
0.5~2.5 |
M5P0.8 |
7.0 |
8.0 |
0.5 |
12.0 |
0.5~2.5 |
M6P1.0 |
9.0 |
10.0 |
0.5 |
15.0 |
1.0~3.0 |
M8P1.25 |
11.0 |
12.0 |
0.5 |
16.0 |
1.0~3.2 |
M10P1.5 |
13.0 |
14.0 |
0.5 |
20.5 |
1.0~4.0 |
M12P1.75 |
16.0 |
19.0 |
0.8 |
26.0 |
1.5~5.0 |
| |
|
|
|
|
|
|
|
| AC SERIES |
M
THREAD
SIZE |
D (mm)
+0
-0.1 |
HD(mm)
±0.2 |
HT (mm)
±0.2 |
L (mm) |
FOR
USING IN
MATERIAL
THICKNESS (mm) |
|
M3P0.5 |
4.8 |
5.8 |
0.5 |
8.8 |
0.5~2.0 |
M4P0.7 |
6.3 |
7.3 |
0.5 |
10.4 |
0.5~2.5 |
M5P0.8 |
7.1 |
8.1 |
0.5 |
12.0 |
0.5~3.0 |
M6P1.0 |
9.5 |
10.5 |
0.5 |
15.0 |
0.7~3.2 |
M8P1.25 |
10.5 |
11.5 |
0.5 |
16.0 |
1.0~4.0 |
M10P1.5 |
12.7 |
13.7 |
0.5 |
19.0 |
1.0~4.0 |
| |
|
|
|
|
|
|
|
| IC SERIES |
M
THREAD
SIZE |
D (INCH)
+0
-0.004 |
HD(INCH)
±0.008 |
HT (INCH)
±0.008 |
L (INCH) |
FOR USING IN
MATERIAL
THICKNESS (INCH) |
| |
# 6-32UNC |
0.249 |
0.289 |
0.02 |
0.409 |
0.02~0.10 |
| |
# 8-32UNC |
0.249 |
0.289 |
0.02 |
0.409 |
0.02~0.10 |
| |
#10-24UNC |
0.280 |
0.320 |
0.02 |
0.464 |
0.02~0.10 |
| |
#10-32 UNF |
0.280 |
0.320 |
0.02 |
0.464 |
0.02~0.10 |
| |
1/4”-20UNC |
0.374 |
0.414 |
0.02 |
0.575 |
0.04~0.16 |
| |
5/16”-18UNC |
0.500 |
0.550 |
0.02 |
0.630 |
0.04~0.16 |
| |
3/8”-16 UNC |
0.500 |
0.550 |
0.02 |
0.748 |
0.04~0.16 |
|
| |
 |
| KCMSERIES |
M
THREAD
SIZE |
D (mm)
+015
-0.00 |
HD (mm)
±0.25 |
L (mm)
±0.38 |
FOR
USING IN
MATERIAL
THICKNESS (mm) |
|
M4P0.7 |
6.75 |
7.87 |
11.15 |
0.5-2.0 |
M4P0.7L |
6.75 |
7.87 |
12.42 |
2.0-3.3 |
M5P0.8 |
7.60 |
8.64 |
12.55 |
0.5-3.3 |
M5P0.8L |
7.60 |
8.64 |
15.34 |
3.3-5.7 |
M6P1.0 |
10.00 |
11.56 |
15.28 |
0.7-4.2 |
M6P1.0L |
10.00 |
11.56 |
17.82 |
4.2-6.6 |
M8P1.25 |
13.50 |
15.11 |
18.08 |
0.7-3.8 |
M8P1.25L |
13.50 |
15.11 |
21.00 |
3.8-7.9 |
M10P1.5 |
13.50 |
15.11 |
18.08 |
0.7-3.8 |
M10P1.5L |
13.50 |
15.11 |
21.00 |
3.8-7.9 |
| |
|
|
|
|
|
| KCISERIES |
M
THREAD
SIZE |
D (INCH)
+0.006
-0.000 |
HD (INCH)
±0.010 |
L (INCH) |
FOR
USING IN
MATERIAL
THICKNESS (INCH) |
|
# 6-32UNC |
0.2656 |
0.310 |
0.439 |
.020-.080 |
# 6-32UNC L |
0.2656 |
0.310 |
0.489 |
.080-.130 |
# 8-32UNC |
0.2656 |
0.310 |
0.439 |
.020-.080 |
# 8-32UNC L |
0.2656 |
0.310 |
0.489 |
.080-.130 |
#10-24UNC |
0.2969 |
0.340 |
0.494 |
.020-.130 |
|
0.2969 |
0.340 |
0.604 |
.130-.225 |
#10-32UNF |
0.2969 |
0.340 |
0.494 |
.020-.130 |
#10-32UNF L |
0.2969 |
0.340 |
0.604 |
.130-.225 |
1/4”-20UNC |
0.3906 |
0.455 |
0.602 |
.027-.165 |
1/4”-20UNC L |
0.3906 |
0.455 |
0.702 |
.165-.260 |
5/16”-18UNC |
0.5312 |
0.595 |
0.712 |
.027-.150 |
5/16”-18UNC L |
0.5312 |
0.595 |
0.827 |
.150-.312 |
3/8”-16 UNC |
0.5312 |
0.595 |
0.712 |
.027-.150 |
3/8”-16 UNC L |
0.5312 |
0.595 |
0.827 |
.150-.312 |
| |
|
|
|
|
|
|
|
----------------------------------------------------------------------------------------------------------------------------
|
|
