FILROX INDUSTRIAL CO., LTD.- Rivet,Blind Rivet,Binding Post Screw,Countersunk Head Insert Nuts,Flat Head Insert Nuts,Blind River Studs,CNC Appliance,Rivet Nut Tool,Hand Tool Riveter,Hand Riveter,Rivet Tool,Air Rivet Nut Tool.

Rivet

A rivet is a permanent mechanical fastener.rivet Before it is installed it rivet consists of a smooth cylindrical shaft with a head on one end.rivet The end opposite the head is called the buck-tail.rivet On installation the rivet is placed in a pre-drilled hole.rivet Then the tail is "upset" (i.e. deformed) so that it expands to about 1.5 times the original shaft rivet diameter and holds the rivet in place.rivet To distinguish between the two ends of the rivet, the original head is called the factory head rivet and the deformed end is called the shop rivet head or buck-tail rivet.

Blind Rivet

A Blind Rivet is a permanent mechanical fastener.Blind Rivet Before it is installed it Blind Rivet consists of a smooth cylindrical shaft with a head on one end.Blind Rivet The end opposite the head is called the buck-tail.Blind Rivet On installation the Blind Rivet is placed in a pre-drilled hole.Blind Rivet Then the tail is "upset" (i.e. deformed) so that it expands to about 1.5 times the original shaft Blind Rivet diameter and holds the Blind Rivet in place.Blind Rivet To distinguish between the two ends of the Blind Rivet, the original head is called the factory head Blind Rivet and the deformed end is called the shop Blind Rivet head or buck-tail Blind Rivet.

Binding Post Screw

A Binding Post Screw is a permanent mechanical fastener.Binding Post Screw Before it is installed it Binding Post Screw consists of a smooth cylindrical shaft with a head on one end.Binding Post Screw The end opposite the head is called the buck-tail.Binding Post Screw On installation the Binding Post Screw is placed in a pre-drilled hole.Binding Post Screw Then the tail is "upset" (i.e. deformed) so that it expands to about 1.5 times the original shaft Binding Post Screw diameter and holds the Binding Post Screw in place.Binding Post Screw To distinguish between the two ends of the Binding Post Screw, the original head is called the factory head Binding Post Screw and the deformed end is called the shop Binding Post Screw head or buck-tail Binding Post Screw.

Countersunk Head Insert Nuts

A Countersunk Head Insert Nuts is a permanent mechanical fastener.Countersunk Head Insert Nuts Before it is installed it Countersunk Head Insert Nuts consists of a smooth cylindrical shaft with a head on one end.Countersunk Head Insert Nuts The end opposite the head is called the buck-tail.Countersunk Head Insert Nuts On installation the Countersunk Head Insert Nuts is placed in a pre-drilled hole.Countersunk Head Insert Nuts Then the tail is "upset" (i.e. deformed) so that it expands to about 1.5 times the original shaft Countersunk Head Insert Nuts diameter and holds the Countersunk Head Insert Nuts in place.Countersunk Head Insert Nuts To distinguish between the two ends of the Countersunk Head Insert Nuts, the original head is called the factory head Countersunk Head Insert Nuts and the deformed end is called the shop Countersunk Head Insert Nuts head or buck-tail Countersunk Head Insert Nuts.

Flat Head Insert Nuts

A Flat Head Insert Nuts is a permanent mechanical fastener.Flat Head Insert Nuts Before it is installed it Flat Head Insert Nuts consists of a smooth cylindrical shaft with a head on one end.Flat Head Insert Nuts The end opposite the head is called the buck-tail.Flat Head Insert Nuts On installation the Flat Head Insert Nuts is placed in a pre-drilled hole.Flat Head Insert Nuts Then the tail is "upset" (i.e. deformed) so that it expands to about 1.5 times the original shaft Flat Head Insert Nuts diameter and holds the Flat Head Insert Nuts in place.Flat Head Insert Nuts To distinguish between the two ends of the Flat Head Insert Nuts, the original head is called the factory head Flat Head Insert Nuts and the deformed end is called the shop Flat Head Insert Nuts head or buck-tail Flat Head Insert Nuts.

Blind River Studs

A Blind River Studs is a permanent mechanical fastener.Blind River Studs Before it is installed it Blind River Studs consists of a smooth cylindrical shaft with a head on one end.Blind River Studs The end opposite the head is called the buck-tail.Blind River Studs On installation the Blind River Studs is placed in a pre-drilled hole.Blind River Studs Then the tail is "upset" (i.e. deformed) so that it expands to about 1.5 times the original shaft Blind River Studs diameter and holds the Blind River Studs in place.Blind River Studs To distinguish between the two ends of the Blind River Studs, the original head is called the factory head Blind River Studs and the deformed end is called the shop Blind River Studs head or buck-tail Blind River Studs.

CNC Appliance

A CNC Appliance is a permanent mechanical fastener.CNC Appliance Before it is installed it CNC Appliance consists of a smooth cylindrical shaft with a head on one end.CNC Appliance The end opposite the head is called the buck-tail.CNC Appliance On installation the CNC Appliance is placed in a pre-drilled hole.CNC Appliance Then the tail is "upset" (i.e. deformed) so that it expands to about 1.5 times the original shaft CNC Appliance diameter and holds the CNC Appliance in place.CNC Appliance To distinguish between the two ends of the CNC Appliance, the original head is called the factory head CNC Appliance and the deformed end is called the shop CNC Appliance head or buck-tail CNC Appliance.

Rivet Nut Tool

A Rivet Nut Tool is a permanent mechanical fastener.Rivet Nut Tool Before it is installed it Rivet Nut Tool consists of a smooth cylindrical shaft with a head on one end.Rivet Nut Tool The end opposite the head is called the buck-tail.Rivet Nut Tool On installation the Rivet Nut Tool is placed in a pre-drilled hole.Rivet Nut Tool Then the tail is "upset" (i.e. deformed) so that it expands to about 1.5 times the original shaft Rivet Nut Tool diameter and holds the Rivet Nut Tool in place.Rivet Nut Tool To distinguish between the two ends of the Rivet Nut Tool, the original head is called the factory head Rivet Nut Tool and the deformed end is called the shop Rivet Nut Tool head or buck-tail Rivet Nut Tool.

Hand Tool Riveter

A Hand Tool Riveter is a permanent mechanical fastener.Hand Tool Riveter Before it is installed it Hand Tool Riveter consists of a smooth cylindrical shaft with a head on one end.Hand Tool Riveter The end opposite the head is called the buck-tail.Hand Tool Riveter On installation the Hand Tool Riveter is placed in a pre-drilled hole.Hand Tool Riveter Then the tail is "upset" (i.e. deformed) so that it expands to about 1.5 times the original shaft Hand Tool Riveter diameter and holds the Hand Tool Riveter in place.Hand Tool Riveter To distinguish between the two ends of the Hand Tool Riveter, the original head is called the factory head Hand Tool Riveter and the deformed end is called the shop Hand Tool Riveter head or buck-tail Hand Tool Riveter.

Hand Riveter

A Hand Riveter is a permanent mechanical fastener.Hand Riveter Before it is installed it Hand Riveter consists of a smooth cylindrical shaft with a head on one end.Hand Riveter The end opposite the head is called the buck-tail.Hand Riveter On installation the Hand Riveter is placed in a pre-drilled hole.Hand Riveter Then the tail is "upset" (i.e. deformed) so that it expands to about 1.5 times the original shaft Hand Riveter diameter and holds the Hand Riveter in place.Hand Riveter To distinguish between the two ends of the Hand Riveter, the original head is called the factory head Hand Riveter and the deformed end is called the shop Hand Riveter head or buck-tail Hand Riveter.

Rivet Tool

A Rivet Tool is a permanent mechanical fastener.Rivet Tool Before it is installed it Rivet Tool consists of a smooth cylindrical shaft with a head on one end.Rivet Tool The end opposite the head is called the buck-tail.Rivet Tool On installation the Rivet Tool is placed in a pre-drilled hole.Rivet Tool Then the tail is "upset" (i.e. deformed) so that it expands to about 1.5 times the original shaft Rivet Tool diameter and holds the Rivet Tool in place.Rivet Tool To distinguish between the two ends of the Rivet Tool, the original head is called the factory head Rivet Tool and the deformed end is called the shop Rivet Tool head or buck-tail Rivet Tool.

Air Rivet Nut Tool

A Air Rivet Nut Tool is a permanent mechanical fastener.Air Rivet Nut Tool Before it is installed it Air Rivet Nut Tool consists of a smooth cylindrical shaft with a head on one end.Air Rivet Nut Tool The end opposite the head is called the buck-tail.Air Rivet Nut Tool On installation the Air Rivet Nut Tool is placed in a pre-drilled hole.Air Rivet Nut Tool Then the tail is "upset" (i.e. deformed) so that it expands to about 1.5 times the original shaft Air Rivet Nut Tool diameter and holds the Air Rivet Nut Tool in place.Air Rivet Nut Tool To distinguish between the two ends of the Air Rivet Nut Tool, the original head is called the factory head Air Rivet Nut Tool and the deformed end is called the shop Air Rivet Nut Tool head or buck-tail Air Rivet Nut Tool.

	1975:	FILROX INDUSTRIAL CO., LTD. was founded during the leaping phase of Taiwanese industrialization. In the beginning, we manufactured semitubular rivets and screws for hand bag and luggage industries.
	1981:	We specialized in manufacturing threaded binding posts, bolts, and rivets for bicycling, electronic, cutlery, and furniture products. This became the foundation of our growth and expansion.
	1983:	After introducing the patented male and female compression rivets, we liberated the Taiwanese Cutlery Industry from Japanese dependence.
	1985:	We became well known for specializing in making tubular rivets and internally threaded bolts and post with cold heading machines in Taiwan. With excellent quality and on-time delivery, our sales were steadily increased.
	1989:	We expanded from the Nan Yeau Factory into the new Taiho Facility which more than doubled our capacity. Also, we marched into the international market in Europe, America, the Middle East, Southeast and Northwest Asia.
	1990:	After installing high-tech multi-process cold headers, our monthly production exceeded 50 million pieces to meet the ever-increasing sales. We also established our markets in the developed countries.
	1993:	Our annual sales broke the 3.5 million NT dollar mark. We spent huge resources on R&D to search for new products and improving quality and on-time delivery.

----------------------------------------------------------------------------------------------------------------------------

Inventions and Patented Products:

Our Research and Development contribute significantly in the expansion of our company. In addition to streamlining the production and quickening the delivery , the department has designed several ingenious products and received more than 10 patents in Taiwan. Two of the inventions spreading worldwide would be detailed in the following:

	1982:	Our R&D developed and received a patent for a capped self piercing rivet in Taiwan. This product went on to receive a Silver Medal at IENA 81 (Internationale ausstellung "Ideen-erfindungen-neuheiten" nurnberg 1981) Expo in Germany when it represented Taiwan for the competition.
	1994:	Our R&D developed a Beryl Bolt Binder File which received patent from USA (patent No. 5,294,226), Germany (Utility Model G93 04 679.0), Taiwan (Patent No.93368), and Japan (application pending).

----------------------------------------------------------------------------------------------------------------------------

Practicality, Responsiveness, and Never - Ending Inprovement for Customers.

The industrial development looks like a high-tech exposition. However, from the most advanced defense industry to the toy manufactory, All of them needs the basic common parts such as screw, post, rivet, bolt, nut,...etc. The success or failure of final products are usually depend on those basic parts. Thus, they are dutifully called the "mother" of industry. Lately, technical advancement and quality assurance stimulate the search for better common parts and assembly. Many resources, especially in developed countries, have been poured into refining those common parts by the designed functional and metallographic studies.

FILROX INDUSTRIAL CO., LTD. has manufactured those basic parts for 20 years. We have always believed in our corporate principle the "Practicality, Responsiveness, and Never-Ending Improvement for Customers" would enable us to earn your support and cooperation. Together, we will achieve and enjoy a "world quality" product.

----------------------------------------------------------------------------------------------------------------------------

To serve people
Regardless how small and common those parts are, they are our line of products. We will diligently provide you with the highest quality products and the most reliable service.

Responsible and practical
The accuracy and speed are strictly controlled in the production line which allows us to manufacture good products in large quantities and with low cost. Usign the high-tech screw and multiprocess cold headers with automated threader, we produce special rivets, screws, and threaded bolts and posts.

Never-Ending improvement for customers.
Quality assurance is key to maintain good products. Our company puts persistent effort in reaching the goal of "zero" defects which enables us to supply our customer with the best products.

Our Corporate History│ Rivet│ Blind Rivet│ Binding Post Screws│ Countersunk Head lnsert Nuts│ Flat Head lnsert Nuts│ Hex, Rivet Nut

Standard Blind Rivet Studs│ Special Rivet Nuts│ CNC Appliance│ Tool│Anchor│ 中文│ Home

----------------------------------------------------------------------------------------------------------------------------

NO.389, SEC.2 CHANG-MEI ROAD, HOMEI, CHANGHUA, TAIWAN 508, R.O.C.
TEL:886-4-7331688 FAX:886-4-7331699

http://www.filrox.com
http://www.filrox.com.tw

Copyright © 2009 FILROX INDUSTRIAL CO., LTD.